Pressure Washer Foam Gun Cannon 1 Litre Bottle Car Wash Foam Sprayer For Karcher Bosch AR Blue LAVOR Elitech Interskol Bort Parkside STIHL and so on.
Please note:
Please carefully view the dimension of adaptors and choose correct one for your wash gun. Below is list for your refference (for part of models).
Model A: With 1/4″ Quick Plug Connector
Model B: For Karcher K series K2 K3 K4 K5 K6 K7
Model C: For Lavor / VAX / Parkside PHD / Some of Hammer / Sterwins / Champion / Craftsman /
Model D: For AR Blue / Black & Decker/ Bosch New Aquatak series/ Some of Interskol/ Michellin / Some of Euro Greenworks/ Greenworks/
Model E: For Some of Interskol/ Elitech / Some of Huter/ Some of Patriot / Daewoo DAX /Bort / Hitachi AW/ Some of Sun Joe.
Model F: For Nilfisk,HUSQVARNA, Gerni Series Car washer gun, also for STIHL RE98 RE108 RE118 RE127 RE128 RE163
Model G: For washer gun with M22/14mm female swivel, for example, some of Karcher HD/HDS (NOT Easy Force) and some other.
Model H: For washer gun with M22/14MM male thread, for example some of KRANZLE / Himore / Ubermann / Bosch GHP.
Model I: For Nilfisk/ KEW / ALTO WAP CALM.
Model J: For some of Nilfisk / Anlu / Kolner / Some of Huter W105-AR, W105-G, W105-GS, W105-QC, W105-P(Old), W105-QD, W135-AR, M135-PW(Old), M165-PW(Old), W165-AR
Model K: For Old type BOSCH / Greenworks US / Husky / Portland / Some of Hammer Flex.
Packing list:
1x Foam generator main body.
1x 1 Litre Transparent bottle with scale line.
1x Adaptor (for connecting wash gun to foam cannon)
1x Silicon Straw With Filter
1x Foam Jet Screw
1x Foam Generator Mesh
1x Teflon tape
Specification:
Adaptor Material: Aluminium
Capacity of bottle: 1 Litre
Requires pressure: 55 bar (800 PSI)
Maximum pressure: 280 bar (4000 PSI)
Construction Material: Aluminium Resistant Nylon, & PA bottle
Maximum Water Temperature: 60° C
Chemical Resistant: Yes
Foam Consumption Adjustable: Yes
Spray Width Adjustable: Yes, 0° to fan 60°
Foam mesh table and orifice: Yes, installed. And they are substituted parts.
How To Use:
1. Installed the adaptor on foam lance tightly with Teflon tape, and then install them on wash gun.
2.Put the shampoo or wash powder into the bottle.
3.Fill the water into bottle,make sure the proportion of shampoo and water is correct!
You'd better use warm water(not hot) to help make more foam.
4. Shake the foam lance to make the shampoo Dissolve and more foam.
5. Connect the bottle to foam lance unit.
6. Connect the foam lance to car washer gun and then you can play it!
