SRNE 3300W Hybrid Solar Inverter 220V/230V MPPT 80A 3300VA Pure Sine Wave Inverter Off-Grid Solar Inverter 24V Battery Charger HF2433S80-H
Note :
The battery capacity of the correct matching system is determined according to the specific usage requirements of the load and application scenarios, otherwise it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or consult online customer service.
Introduction：
1、HF series is a new hybrid solar charge inverter, which integrates solar energy storage &means charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has high response speed, high reliability and high industrialstandard. Four charging modes are optional,i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; and two output modes are available,i.e. Inverter and Mains, to meet different application requirements. The solar charging module applies the latest optimized MPPT technology to quickly track the maximum power point of the PV array in any environment and obtain the maximum energy of the solar panel in real time.
2、Through a state of the art control algorithm, the AC-DC charging module realizes fully digitalvoltage and current double closed loop control, with high control precision in a small volume.
3、Wide AC voltage input range and complete input/output protections are designed for stable and reliable battery charging and protection.
4、Based on full-digital intelligent design, the DC-AC inverter module employs advanced SPWM technology and outputs pure sine wave to convert DC into AC. It is ideal for AC loads such as household appliances, power tools, industrial equipment, and electronic audio and video equipment. The product comes with a segment LCD display design whichlallows real-time display of the operating data and status of the system. Comprehensive electronic protections keep the entire system safer and more stable.
①AC input port
②AC output port
③CAN communication port
④USB communication port
⑤RS485 communication port
⑥Dry contact port
⑦Grounding screw hole
⑧Overload protector
⑨Cooling fan
⑩Battery port
⑪Cooling fan
⑫ON/OFF rocker switch
⑬PV port
⑭Touch button
⑮LED Indicator
⑯LCD screen
Feature：
·Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
·Two output modes: mains bypass and inverter output; uninterrupted power supply.
·Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.
·Advanced MPPT technology with an efficiency of 99.9%.
·With the charging requirement (voltage, current, mode) settings, and suitable for various types of energy storage batteries.
·ON/OFF rocker switch for AC output control.
·Power saving mode available to reduce no-load loss.
·Intelligent variable speed fan to efficiently dissipate heat and extend system life.
·Lithium battery activation design, allowing access of lead-acid battery and lithium battery.
·360 ° all-round protection with a number of protection functions. Such as overload, short circuit and over current.
·Supply of a variety of user-friendly communication modules, such as RS485(GPRS, WiFi ), USB etc., and suitable for computer, mobile phones, Internet monitoring as well as remote operations.
· Lithium battey can be activated by both mains and PV.
Sepecification：
|
Model |
HF2433S80-H |
|
AC mode |
|
|
Rated input voltage |
220Vac/230Vac |
|
Input voltage range |
(170Vac~280Vac) ±2%；(90Vac-280Vac) ±2% |
|
Frequency |
50Hz/ 60Hz (auto-sensing) |
|
Frequency Range |
47±0.3Hz-55±0.3Hz (50Hz)/57±0.3Hz-65±0.3Hz (60Hz); |
|
Overload/short circuit protection |
Circuit breaker |
|
Efficiency |
>95% |
|
Conversion time (bypass and inverter) |
10ms (Typical value) |
|
AC reverse protection |
Available |
|
Maximum bypass overload current |
30A |
|
Inverting mode |
|
|
Output voltage waveform |
Pure sine wave |
|
Rated output power(VA) |
3300 |
|
Rated output power(W) |
3300 |
|
Power factor |
1 |
|
Rated output voltage (Vac) |
230Vac |
|
Output voltage error |
±5% |
|
Output frequency range (Hz) |
50Hz ± 0.3Hz/60Hz ± 0.3Hz |
|
Efficiency |
>92% |
|
Overload protection |
(102%<load<110%) ±10%: reporting error and turn off the output after 5 minutes; (110%<load<125%) ±10%: reporting error and turn off the output after 10 seconds; |
|
Peak power |
6000VA |
|
Loaded motor capacity |
2HP |
|
Output short-circuit protection |
Breaker |
|
Specification of bypass breaker |
30A |
|
Rated battery input voltage |
24V (minimum start voltage 22V) |
|
Battery voltage range |
20.0Vdc~33Vdc ± 0.6Vdc (Undervoltage alarm/shutdown voltage/overvoltage alarm /overvoltage recovery… settable on LCD screen) |
|
Power saving mode |
Load ≤50W |
|
AC charge |
|
|
Battery type |
Lead acid or lithium battery |
|
Maximum charge current |
80A |
|
Charge current error |
± 5Adc |
|
Charge voltage range |
20~33Vdc |
|
Short-circuit protection |
Breaker and blown fuse |
|
Breaker specification |
30A |
|
Overcharge protection |
Turn off charge after 1min alarm |
|
Solar charge |
|
|
Maximum PV opencircuit voltage |
500Vdc |
|
PV operation voltage range |
120-500Vdc |
|
MPPT voltage range |
120-450Vdc |
|
Battery voltage range |
20~33Vdc |
|
Maximum output power |
4000W |
|
Charge current range of solar energy (settable) |
0-80A |
|
Charge short-circuit protection |
Blown fuse |
|
Wiring protection |
Reverse polarity protection |
|
Authentication specification |
|
|
Specification authentication |
CE(IEC 62109-1) |
|
EMC authentication grade |
EN61000 |
|
Operation temperature range |
-15°C to 55°C |
|
Storage temperature range |
-25°C ~ 60°C |
|
Humidity range |
5% to 95% (Conformal coating protection) |
|
Noise |
≤60dB |
|
Thermal dissipation |
Forced cooling with adjustable air speed |
|
Communication interface |
USB/RS485 (WiFi/GPRS)/dry node control |
|
Dimension (L*W*D) |
378mm*280mm*103mm |
|
Weight (kg) |
6.9 |
WIFI Module：
Package Include：
·All-in-one Solar Charge Inverter*1
·User Manual *1
·M5 Screws *4
·Terminal Blocks *2
Item Pictures：
4 GREAT REASONS TO BUY FROM US:
- Over 37,000 happy customers worldwide
- Real people on our support team ready to help
- The finest materials and stunning design — all our products are developed with an obsessive dedication to quality, durability, and functionality
- We use the most secure online ordering systems on the market, and are constantly improving our software to make sure we offer the highest possible security
BUY WITH CONFIDENCE
Our mission is to make your shopping experience as safe and enjoyable as possible. Have questions? Feel free to contact our award-winning customer care team for advice on everything from product specifications to order tracking.
- Money back guarantee: Something not quite right? If you’re not totally satisfied with your purchase, you can return it within 15 days for a full refund
- Risk-Free Purchase: We utilize industry-standard Secure Sockets Layer (SSL) technology to allow for the encryption of all the sensitive information, so you can be sure your details are completely safe with us
- Trustworthy payment method: We partner with the most popular online payment solutions that guarantee enhanced security and fast transaction processing
