SRNE 5KW 48VDC 220VAC Solar Inverter Pure Sine Wave 80A MPPT Solar Controller On-off Grid Hybrid Pure Sine Wave Inverter 500VDC

Model Number:HF4850S80-H

Input Voltage:48V

Output Voltage:230v

Output Frequency:50Hz/ 60Hz

Output Type:Single

Size:426mm*322mm*126mm

Type:DC/AC Inverters

Inverter Efficiency:>95%

Certificate:CE(IEC/EN62109-1,-2),ROHS2.0

Warranty:14 months

Weight:11kg

Product name:all-in-one hybridsolar charge inverter

Output voltage waveform:Pure sine wave

AC charge current:60A

PV charge current:80A

Wifi function: support

Maximum PV open circuit voltage:500v

Battery type:Lead acid or lithium battery

Protection:Low battery,High battery , Over load ,Short circuit

Transfer Time:<4ms

Specification:

Description：

HF series is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has high response speed, high reliability and high industrial standard. Four charging modes are optional, i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging;  and two output modes are available, i.e. Inverter and Mains, to meet different application requirements. The solar charging module applies the latest optimized MPPT technology to quickly track the maximum power point of the PV array in any environment and obtain the maximum energy of the  solar panel in real time.

1. Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.

2. Two output modes: mains bypass and inverter output; uninterrupted power supply.

3. Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.

4. Advanced MPPT technology with an efficiency of 99.9%.

5. Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.

6. ON/OFF rocker switch for AC output control.

7. Power saving mode available to reduce no-load loss.

8. Intelligent variable speed fan to efficiently dissipate heat and extend system life.

9. Lithium battery activation design, allowing access of lead-acid battery and lithium battery.

10. 360 ° all-round protection with a number of protection functions.

11. Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.

1. PV module: Convert light energy into DC power, and charge the battery through the all-in-one solar charge inverter, or directly invert into AC power to drive the load.

2. Mains or generator: Connected at the AC input, to power the load while charging the battery. If the mains or generator is not connected, the system can also operate normally, and the load is powered by the battery and PV module.

3. Battery: Provided to ensure normal power supply to the system loads when solar energy is insufficient and the Mains is not connected.

4. Household load: Allow connection of various household and office loads, including refrigerators, lamps, TVs, fans and air conditioners.

5. All-in-one solar charge inverter: The energy conversion unit of the whole system.

Shows the system application scenario of this product. A complete system consists of the following parts:

1. PV module: Convert light energy into DC power, and charge the battery through the all-in-one solar charge inverter,or directly invert into AC power to drive the load.

2. Mains or generator:Connected at the AC input, to power the load while charging the battery. If the mains or generator is not connected,the system can also operate normally, and the load is powered by the battery and PV module.

3. Battery: Provided to ensure normal power supply to the system loads when solar energy is insufficient and the Mains is not connected.

4. All-in-one solar charge inverter: The energy conversion unit of the whole system.

Specific system wiring method depends on the actual application scenario.

Application