SRNE 6.2KW 48VDC 220/380VA 3 Phase Hybrid Solar Inverter Off-grid Inverter Dual PV Max 550VDC Mppt 100A Charger Parallel 6 Units HYP4860S100-H
Note :
The battery capacity of the correct matching system is determined according to the specific usage requirements of the load and application scenarios, otherwise it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or consult online customer service.
Introduction：
HYP series is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has high response speed, high reliability and high industrial standard. Four charging modes are optional; Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; and two output modes are available' Inverter and Mains, to meet different application requirements.
The solar charging module applies the latest optimized MPPT technology to quickly track the maximum power point of the PV array in any environment and obtain the maximum energy of the solar panel in real time.
Through a state of the art control algorithm, the AC-DC charging module realizes fully digital voltage and current double closed loop control, with high control precision in a small volume. Wide AC voltage input range and complete input/output protections are designed for stable and reliable battery charging and protection.
Based on full-digital intelligent design, the DC-AC inverter module employs advanced SPWM technology and outputs pure sine wave to convert DC into AC. It is ideal for AC loads such as household appliances, power tools, industrial equipment, and electronic audio and video equipment. The product comes with a segment LCD design which allows real-time display of the operating data and status of the system. Comprehensive electronic protections keep the entire system safer and more stable.
Feature：
Overview：
Parallel connection method：
Sepecification：
|
MODEL |
HYP4860S100-H |
|
Parallel mode |
|
|
Permitted parallel number |
1~6 |
|
AC mode |
|
|
Rated input voltage |
220/230Vac |
|
Input voltage range |
(170Vac~280Vac) ±2% |
|
Frequency |
50Hz/ 60Hz (Auto detection) |
|
Frequency Range |
47±0.3Hz ~ 55±0.3Hz (50Hz); |
|
Overload/short circuit |
Circuit breaker |
|
Efficiency |
>95% |
|
Conversion time (bypass and inverter) |
10ms (typical) |
|
AC reverse protection |
Available |
|
Maximum bypass overload |
40A |
|
Inverter mode |
|
|
Output voltage waveform |
Pure sine wave |
|
Rated output power (VA) |
6200 |
|
Rated output power (W) |
6200 |
|
Power factor |
1 |
|
Rated output voltage (Vac) |
230Vac (200/208/220/240Vac |
|
Output voltage error |
±5% |
|
Output frequency range(Hz) |
50Hz ± 0.3Hz |
|
Maximum Efficiency |
>92% |
|
Overload protection |
(102% < load <125%) ±10%: report error and turn off the output after 5 minutes; (125% < load < 150%) ± 10%: report error and turn off the output after 10 seconds; |
|
Peak power |
12400VA |
|
Loaded motor capability |
5HP |
|
Rated battery input voltage |
48V (Minimum starting voltage 44V) |
|
Battery voltage range |
Undervoltage alarm/shutdown voltage/overvoltage alarm /overvoltage |
|
Power saving mode self- |
Load≤50W |
|
AC Output（Grid） |
|
|
Rated Output Power (W) |
6200W |
|
Max. apparent power (VA) |
6200VA |
|
Max. output current (A) |
27A |
|
THDI |
＜3% |
|
Rated voltage(V) |
230Vac |
|
Frequency |
50Hz/60Hz |
|
AC charging |
|
|
Battery type |
Lead acid or lithium battery |
|
Maximum charge |
0-80A |
|
Charge current error |
± 3Adc |
|
Charge voltage range |
40 –58Vdc |
|
Short circuit protection |
Circuit breaker and blown fuse |
|
Circuit breaker specifications |
40A |
|
Overcharge protection |
Alarm and turn off charging after 1 minute |
|
PV charging |
|
|
Maximum PV open circuit |
550Vdc |
|
PV operating voltage range |
120-480Vdc |
|
MPPT voltage range |
120-480Vdc |
|
Battery voltage range |
40-60Vdc |
|
Maximum PV input power |
4500W+4500W |
|
Maximum PV input current |
18A+18A |
|
PV charging current range |
0~100A |
|
Charging short circuit |
Blown fuse |
|
Wiring protection |
Reverse polarity protection |
|
Hybrid charging Max charger current specifications (AC charger+PV charger) |
|
|
Max charger current(can be |
100A |
|
Certified specifications |
|
|
Certification |
EN 62109-1，EN 62109-2 , NRS097-2-1 |
|
EMC certification level |
EN IEC61000-6-3 |
|
Operating temperature range |
-10°C to 55°C |
|
Storage temperature range |
-25°C ~ 60°C |
|
Humidity range |
5% to 95% (Conformal coating protection) |
|
Noise |
≤60dB |
|
Heat dissipation |
Forced air cooling, variable speed of fan |
|
Communication interface |
USB/RS485(WiFi/GPRS)/Dry contact control |
|
Dimension (L*W*D) |
510mm*350mm*133mm |
|
Weight |
13KG |
WIFI Model：
Item Pictures：
4 GREAT REASONS TO BUY FROM US:
- Over 37,000 happy customers worldwide
- Real people on our support team ready to help
- The finest materials and stunning design — all our products are developed with an obsessive dedication to quality, durability, and functionality
- We use the most secure online ordering systems on the market, and are constantly improving our software to make sure we offer the highest possible security
BUY WITH CONFIDENCE
Our mission is to make your shopping experience as safe and enjoyable as possible. Have questions? Feel free to contact our award-winning customer care team for advice on everything from product specifications to order tracking.
- Money back guarantee: Something not quite right? If you’re not totally satisfied with your purchase, you can return it within 15 days for a full refund
- Risk-Free Purchase: We utilize industry-standard Secure Sockets Layer (SSL) technology to allow for the encryption of all the sensitive information, so you can be sure your details are completely safe with us
- Trustworthy payment method: We partner with the most popular online payment solutions that guarantee enhanced security and fast transaction processing
