Things buyers must know:
1. The equipment must be connected to the correct power source. The acceptable voltage range of this system is 8-20V. If the voltage is too high or too low, the system will not work properly.
2. Installing this system requires some professional automotive electronics knowledge. Please read the product manual carefully. Please pay attention to output signal cables must be connected to the correct signal according to the “+” or “-” on the product manual. Wrong connections may cause short circuits or burnout of the product.
3. All products have been strictly inspected before leaving the factory to ensure that they are complete and working properly. If you have any problems after receiving the product, please contact us immediately. We will give you the best solution. Good communication is very necessary , we reject all disputes opened without communication.
4. The product manual is not only in English, we also have Russian, Portuguese, Spanish, etc., You can check the different languages by scanning the QR code in the product manual.
5. The product kit is the same as shown in the picture, please note that the kit with the mobile app on the picture has the function of the mobile app, and the kit without the mobile app on the picture does not have the app function.
6. Different model have different kit. Each kit is the same as shown in the picture. You can check the detailed introduction of the kit at the bottom of the website.
Model DD3CBT
Features:
1. lock/unlock/remote start by remote key or APP.
2. Automatic engine lock (the engine cannot be started after locking).
3. Push one button start / stop engine.
4. Remot open back box by key or APP (Requires the car itself to have a controllable circuit).
5. Sound and light alarm or silent anti-theft.
6. APP PKE keyless comfort entry function, automatically unlock the car 1.5-3 meters away from the car, automatically lock the door 3-5 meters away from the car.
7. Mobile APP keyless entry can be temporarily disabled.
8. WPreheating start, you can choose between a gasoline car or a diesel car using the switch.
9. Automatically lock the door by stepping on the foot brake after starting, and automatically unlock when the flame is turned off
10. Blue LED Alarm light prompt
11. Emergency reset.
12. Anti-theft alarm function (Illegal door opening or hit the brakes to alarm).
13. You can disable the remote start function via the switch.
14. Using high-quality relays to output control signals, the system is more stable and reliable.
Packing List:
2* remote keys
1* Ignition and alarm module
2* Install wiring harness
1* Start-stop button
1* Emergency reset button
1* The LED light
1* Product manual
Q&A about the product:
1. If I remote start engine it mean my car is unsafe and anyone can drive?
This system is very secure, it has a complete anti-theft system, keep lock when remote start, and auto shut down the engine and alarming when trespassing.
2. How far is the remote start?
The remote control distance is about 60 meters; the APP is controlled by Bluetooth distance is about 20 meters (different mobile phones have different Bluetooth power, some may be 50 meters, some may be 5 meters).
3. How to use the app?
First, scan the QR code to download the app. After installation, open the app, tap the Bluetooth icon in the top left corner, then tap Bluetooth pairing. Enter the default password 123456. Once pairing is complete, return to the main screen, tap the settings icon in the top right corner, then tap Match Remote. Press the lock and unlock buttons on the remote simultaneously to complete the pairing.
If you want to put the start / stop button in another location, please click the link below to purchase the punch button set
Matters Needing Attention 1:
If your car has an anti-theft chip, and the chip induction coil at the ignition switch cannot be removed, you may need an additional small box to guide the chip signal.
Matters Needing Attention 2:
If you order a model with PKE keyless entry.Please refer to the picture to place the PKE antenna. Be careful not to stick the PKE antenna to metal, because the metal will absorb electromagnetic signals, which will make the induction automatic unlocking insensitive.
How to start and stop?
start 1:when the brake is pressed the light of the start button will flash,at this time,press the button to start the engine,if the button is pressed continuously the engine will continue to start;
start 1:start the engine by holding the button for more than 5 seconds without pressing the brake
stop 1:press the brake and then press the button to shut off the engine
stop 2:hold the button for more than 5 seconds without applying the brake to shut off the engine
ABOUT US
My friend, thank you for your interest in this item, we are a source factory, We mainly manufacture: push start system, remote start, two-way car alarm, we use high-quality relays, quality cables and sockets, the product quality is stable and reliable, even in the cold winter of Siberia, it also works fine.
If you like us,please add our ALLEXPRESS shop to My Favorites list.If you are satisfied with our product and service,please give us a positive feedback and please come back soon and buy from us again !Thank you very much for your support.
