STC-1000 STC-3000 STC-3008 STC-3018 LED Digital Temperature Controller Thermostat Thermoregulator Incubator 12V 24V 110V 220V

STC-1000 STC-3000 STC-3008 STC-3018 LED Digital Temperature Controller Thermostat Thermoregulator Incubator 12V 24V 110V 220V

• Modle: STC-1000

• Switch the modes between cool and heat; Control temperature by setting the temperature setting value and the difference value; Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds temperature limit or when sensor error.

Technical Parameters:

• 1.Temperature measuring range: -50 ° C ~ 99 ° C

• 2.Resolution: 0.1 ° C;

• 3.Accuracy:+- 1° C (-50 ° C ~ 70 ° C);

• 4.Sensor error delay: 1 minute

• 5.Power supply: AC 110-220V 50/60Hz,  DC 12V, DC 24V, DC12-72V( Choose power supply when you place order ) ;

• 6.Power consumption: <3W;

• 7.Sensor: NTC sensor (1PC);

• 8.Relay contact capacity:Two Relay Cool 10A/220VAC; Heat 10A/220VAC;

• 9.Ambient temperature: 0 ° C ~ 60 ° C;

• 10.Storage temperature: -30 ° C ~ 75 ° C;

• 11.Relative humidity: 20% ~ 85% (No condensate)

• 12.Sensor length: 1.0m

• 13. Front Panel Size: 75×34.5mm ; Product Size: 75×34.5×85 mm ; Mounting Size: 71x29mm

Menu Instruction

Key operation instruction

1 .The way to check parameter:

Under normal working status, press “up” key it displays temperature setting value; press “down” key it displays the difference value.

2. The way to set parameter:

Under controller normal working status, press “s”key for 3s or more to enter parameter modifying mode, and the “Set” indicator light on, screen displays the first menu code “F1”.

Press “up”key or “down” key to adjust up and down and display the menu iem and the code of the menu item.Press “s” key to display the parameter value of the current menu. Press both “s” key and hold “up”key or “down” key simultaneously to choose and adjust the parameter value of the current menu value promptly. After finishing the setting, press and release the “(I)” key instantly to save the parameter modified value and return to display the normal temperature value. If no key operation within 10 seconds, system won't save modified parameter, screen back to display normal temperature.

3. Restore system data

When electrified, system will check itself, screen will display “Er” if error exit, please press any key at this time, and it restores default value and enter into normal working mode, it is advised to reset the parameter value under such conditions.

Package Included:

• 1 x Temperature Controller

• 1 x Temperature sensor

• 

• Modle: STC-3000
   
  Features:
   
  Switch the modes between cool and heat.
  Control temperature by setting the temperature set value and the difference value.
  Temperature measuring range:-50°~99°.
  Accuracy:±1°(50°~70°).
  Resolution:0.1°.
  Power consumption: <3W.
  Relay contact capacity: Cool(10A/250VAC); Heat(10A/250VAC).
  Ambient temperature:0°-60°.
  Storage temperature:-30°~75.
  Relative humidity: 20-85%(No condensate).
  Specifications:
  Material: electronic element
  Color: gray & orange
  Voltage: 12V, 24V, 220V
  Size: 75*34.5*85mm
   
  Package Included:
   
  1 x Digital Thermostat Temperature Controller Thermometer
•  

• 

• 

• Modle: STC-3008

• Description:

  Independent Dual-way temperature controller.

  Heating or cooling control.Red and blue LED display.

  All parameters setting can be saved after short circuit.

  Directly power output.

  Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial equipment and other temperature-controlled system.

  Switch the modes between cool and heat;

  Control temperature by setting the temperature setting value and the difference value;

  Temperature calibration;

  Refrigerating control output delay protection;

  Alarm when temperature exceeds temperature limit or when sensor error.

  Specification:

  Temperature measuring range: -55-120 Celsius

  Accuracy: 0.1 Celsius

  Sensor error delay: 1 minute

  Power supply: DC 12V DC 24V AC 110-220V

  Power consumption: <3w

  Sensor: NTC sensor

  Relay contact capacity: Cool (10A/240VAC); Heat (10A/240VAC)

  Ambient temperature: 0-60 Celsius

  Storage temperature: -30-75 Celsius

  Front panel size: 75×34.5(mm)

  Mounting size: 71×29(mm)

  Product size: 75×34.5×85(mm)

  Sensor length: 1 meter (include the probe)

  Set start up temperature:

  Press the “up” button once to display the starting temperature. Long press the “up” button for about 3 seconds,The required temperature can be set by the up and down keys

  Set the stop temperature:

  Press the button once to display the stop temperature. Long press the button for about 3 seconds and the stop temperature number flashes. The required temperature can be set by the up and down keys

  Press “Up 1” Button & “Up 2″Button at the same time to setting mode

  Code	Function	Set Range	Default
  P0	Compressor 1 delay time	0-60min	0min
  P1	Compressor 2 delay time	0-60min	0min
  P2	High temperature alarm value	55-120 ° C	120 ° C
  P3	Low temperature alarm value	55-120 ° C	-55 ° C

  How to restore factory Settings

  Press the “Down 1” and “Down 2” button at the same time,  the factory setting is restored

  

  

  Modle: STC-3018

   

  Features:

   

  1.Automatic conversion of refrigeration and heating mode

  2.Control mode of return difference;Temperature display resolution 0.1

  3.Multiple alarm mode selection

  4.Support temperature correction and support for power loss (the parameters of the sudden power failure are still valid

  5.Application range is like home temperature control, farm, various cold storage, greenhouse, aquarium, etc

   

  Specifications:

   

  Display Type: Digital

  Temperature sensor: NTC 10K

  Senor length:1.0m

  Temperature measuring range: -55 ° C ~ 120 ° C /  -66°F~248°F

  Resolution: 0.1 ° C

  Accuracy:±1° C

  Power supply: 110-220VAC 50/60Hz,  12V DC , 24V DC(Please choose power supply when ordering)

  Power consumption: <3W

  Storage temperature: -30 ° C ~ 75 ° C

  Relative humidity: 20% ~ 85% (No condensate)

  Relay contact capacity: 10A/240VAC; Heat 10A/240VAC

   

  Instruction:

   

  Normal mode: The red digital tube on the left shows the real-time temperature, the blue digital tube on the right shows the set temperature.

  Setting mode: The red digital tube on the left displays the setting mode, the blue digital tube on the right displays the setting contents.