STC-3008 110V 220V Thermostat Temperature Controller for Birds Two Relay Output Temperature Regulator Heating Cooling Thermometer
Product Features:
Switch the modes between cool and heat;
Control temperature by setting the temperature setting value and the difference value;
Temperature calibration;
Refrigerating control output delay protection;
All parameters setting can be saved when power off.
Can be used for domestic freezer, water tanks, refrigerator,industrial chiller, steamer, industrial equipment and other temperature control applications.
Name |
Digital Dual Temperature Controller |
Temperature measuring range |
-55°C~120°C |
Resolution |
0.1 |
Controlling Accuracy |
1°C |
Relay contact current |
10A/240V AC |
Temperature Sensor |
NTC10K |
Length of cable |
1m |
Power supply |
110~220V |
Data Save |
YES |
Working temperature |
0°C~50°C |
Storage Temperature |
-10°C~60°C |
Product Specification:
Product size: 75mm*85mm*35mm
Sensor length: 1 meter (include the probe)
Technical Parameters:
Temperature measuring range: -55-120 Celsius
Accuracy: 0.1 Celsius
Sensor error delay: 1 minute
Power supply: AC 110-220V
Default |
|||
P0 |
①: Delay start |
0-60 minutes |
0 |
P1 |
②: Delay start |
0-60 minutes |
0 |
P2 |
High temperature alarm |
P3~120°C |
120°C |
P3 |
Low temperature alarm |
P2~-55°C |
-55°C |
Note: Friend, if you have any question, just feel free to contact with us, we will help you to solve it, thanks.
Packing List:
1 x Dual Digital Thermostat with Dual Sensors
Product Pictures:
Long press UP 1 button for 3 seconds, ① display flashes, press UP or DOWN button to set the start temperature(25°C default)
Long press DOWN 1 button for 3 seconds, the display flashes, press UP or DOWN button to set the stop temperature (40°C default)
Long press UP 2 button for 3 seconds, ② display flashes, press UP or DOWN button to set the start temperature(25°C default)
Long press DOWN 2 button for 3 seconds, the display flashes, press UP or DOWN button to set the stop temperature (40°C default)
Long press DOWN 1 and DOWN 2 button for 3 seconds to reset the controllers.
Heating Mode–Start temperature<stop temperature
Cooling Mode–Start temperature>Stop temperature