STC-3008
Description:
Switch the modes between cool and heat;
Control temperature by setting the temperature setting value and the difference value;
Temperature calibration;
Refrigerating control output delay protection;
Alarm when temperature exceeds temperature limit or when sensor error.
Technical Parameters:
Temperature measuring range: -55-120 Celsius
Accuracy: 0.1 Celsius
Sensor error delay: 1 minute
Power supply: DC 12V DC 24V AC 110-220V
Power consumption: <3w
Sensor: NTC sensor
Relay contact capacity: Cool (10A/240VAC); Heat (10A/240VAC)
Ambient temperature: 0-60 Celsius
Storage temperature: -30-75 Celsius
Set start up temperature:
Press the “up” button once to display the starting temperature. Long press the “up” button for about 3 seconds,The required temperature can be set by the up and down keys
Set the stop temperature:
Press the button once to display the stop temperature. Long press the button for about 3 seconds and the stop temperature number flashes. The required temperature can be set by the up and down keys
Press “Up 1” Button & “Up 2″Button at the same time to setting mode
|
Code |
Function |
Set Range |
Default |
|
P0 |
Compressor 1 delay time |
0-60min |
0min |
|
P1 |
Compressor 2 delay time |
0-60min |
0min |
|
P2 |
High temperature alarm value |
55-120 ° C |
120 ° C |
|
P3 |
Low temperature alarm value |
55-120 ° C |
-55 ° C |
How to restore factory Settings
Press the “Down 1” and “Down 2” button at the same time, the factory setting is restored
