Model 1
Overview:
Independent Dual-way temperature controller. Heating or cooling control.Red and blue LED display. All parameters setting can be saved after short circuit. Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial equipment and other temperature-controlled system.
Specifications:
Power Supply:12VDC、24VDC、110V-220VAC Temperature control range: -50~120°C Resolution Ratio: 0.1°C(-9.9-99.9); 1°C(other range) Measurement accuracy: ±0.1°C Control accuracy: 1°C Refresh rate: 0.5S Sensor1 2: NTC10K Waterproof sensor each Output1 2: Max 10A directly output each Environmental requirements: -10-60°C , humidity 20%-85%RH Size:100mm(L)*55mm(W)*32mm(Depth) Cutting size: 75(L)mm*55(W)mm M3 screw hole Power consumption: Static current: ≤35MA,attract current: ≤65MA
Wiring Diagram:
Model 2
Prameters:
Features:
Long press UP button for 3 seconds, ① display flashes, press UP or DOWN button to set the start temperature(25°C default) Long press DOWN button for 3 second, the display flashes, press UP or DOWN button to set the stop temperature (40°C default) Long press UP button for 3 seconds, ② display flashes, press UP or DOWN button to set the start temperature(25°C default) Long press DOWN button for 3 second, the display flashes, press UP or DOWN button to set the stop temperature (40°C default) Press the “Down 1” and “Down 2” button at the same time, the factory setting is restored Heating Mode–Start temperature Cooling Mode–Start temperature>Stop temperature
