⭐⭐ PROPOSAL FOR THE REQUIRED! ⭐⭐

You’re renovating your apartment, but you don’t know if you canSafethe way to interfere with the walls so thatdo not damagethe structural and installation elements contained therein? In such situationsYou’ll need our device!

Get to know the detector, which is the basic equipment not only for professionals, but also for DIY enthusiasts who carry out repairs themselves.

See how it works!

⭐⭐ DETECTION OF IRON METALS ⭐⭐

Are you afraid thatYou’ll damage the drill.When you come across the rebar? You’ve had enoughBroken drills?MAKA wire detector is undoubtedlyinvestmentwhichIt’s turning fast!

Our detector is able to detect reinforcement bars and steel elements up to 10 cm deep into the wall!

The accuracy of the metal mode is±2cm.

⭐⭐ Copper wire detection ⭐⭐

Drilling cablesordamagecan lead at best toa serious accident.Repairing such a defect may turn out to be andLong and expensive!

The detector will make your work much easier and indicate where the wires are located under voltage.

The detector is able to detect AC wires with frequency 40-60 HZ.

⭐⭐ DETECTION OF NON-ferrous METALS ⭐⭐

Have you ever drilled a hole without knowing that in the wall you will not encountergas pipeorwater pipe? Forget the stress when drilling walls!

The cable detector will allow you to safely renovate the apartment, without exposing the installation systems to damage, and yourself – to harm your health.

⭐⭐ WOOD DETECTION ⭐⭐

Do you want a solid fastening of screws, and you are not sure where the structural beams are located?

Our detector will show you where under G-K boards, plaster or tiles you will find durable structural wood!

✅  BUILDING

1. Signalling diode

2. Display

3. Button start and metal type input

4. Foreign body (usually wood)

5. Detection of ferrous metals, non-magnetic copper, live wire buttons

✅  BUILDING BACK

1. Felt washer No 1

2. Sensor area

3. Detector specifications

4. Felt washer No 2

5. Battery cover

⭐⭐ READ DISPLAY ⭐⭐

a. Indicator for magnetic/non-magnetic metals

b. Indicator for current detection mode (wood, metal, electric beam)

c. Battery indicator

d. Metal detection of the depth display area (this depth means: the distance is from the center of the detection area to the measured object)

e. Indicator of distance of the detected object from the center of the detection area

f. Detection signal strength display area

⭐⭐ WHY ⭐⭐

✅  It will ensure safe and stress-free renovation

✅  Easy to use

✅  Light and handy

✅  Resistant to high and low temperatures

✅  Advanced LED display

⭐⭐ 4 DETECTION MODES ⭐⭐

• Iron metals: 100mm

• Non-ferrous metals (e.g. copper): 80mm

• Voltage cables**: 50mm

• Wood: 20mm

• Automatic shutdown when idle: 5 min

✅  SCOPE OF WORKING Humidity ✅

• Metal: 0-85% RH

• Wood: 0-60% RH

• Voltage cables**: 0-30% RH