Welcome to TrackerKing Store!
All our wired devices support IP and port modification.
Our devices support SIM card/M2M chip usage. To use an M2M chip, you need to insert a SIM card and configure the device's APN before using the M2M chip.
Our wired devices support the GT06 protocol.
If you need to use our tracking software, we offer a one-year free trial of the platform. If you encounter login issues, please contact customer service.
About Platform:
Login name: IMEI number
Password: 123456 (If you are unable to log in, please send your device's IMEI to customer service for verification.)
*If you have your own platform, we support modifying the device's IP and port via SMS commands.
• Real time tracking
• History route
• Working Voltages: 9-90V
• ACC igniition detection
• Geo-Fence
• SOS Alarm
• Overspeed Alarm
• Move Alarm
• Vibration Alarm
• Power Failure Alarm
Package Included:
1 x2G ST901
1 xCharging Cable
1 xUser Manual
1. Why can't I log in to the app or website?
Please check that you entered the device's IMEI correctly. If you still can't log in even if you did, please send the device's IMEI to customer service and we'll recreate your account.
2. Why does the device show “unactivated” on the platform?
First, check that the three indicator lights on the device are on/flashing and that there's sufficient balance on the SIM card. Secondly, check that the device's IP, port, and APN settings are correct. If you're unsure, you can verify by sending the command: CXZT.
3. Why does the device show “offline” on the platform?
Send the SMS command “CXZT” to the device to check that the GPS settings, IP address, port number, and APN are correct.
4. Why does the device show “sea location” on the platform?
This indicates that the GPS signal is currently unavailable. Please place the device in an open area to obtain a good GPS signal.
Notes:
Due to time differences in different regions, if you encounter any problems after purchase, we will promptly reply to you within 24 hours after going online.
Please allow slight dimension difference due to different manual measurement.
Please feel free to chat/contact us for more information and any related queries. Thanks！