VDIAGTOOL VC100 Coating Thickness Gauge Digital Backlight Car Paint Electroplate Metal Coating Tester English Manual

Welcome To VDIAGTOOL Official Store：

1. All Products in the VDIAGTOOL Official Store are 100% Original and Authentic, Can be Checked Through The S/N.

2.VDIAGTOOL Provides 24-hour Online Service and Professional Technical Support.For example,if you want to change the language, you just need to send us the SN（on the back of the device）,and then we will authorize the language to you within an hour!

3.We hope you can have a pleasant shopping experience at VDIAGTOOL Official Store,any Questions Please Contact the Seller.

4.Dear customer~, any positive feedback from you is the driving force for our progress.
Looking forward to your visit
Best wish
VDIAGTOOL Team

Muti-function：

🚙Measuring the Thickness of Vehicles' and Other Coating + Used for Car Coating Damage Assessment/Car Accident Detection: This portable coating thickness gauge can measure the thickness of non-metallic coating(such as paint, film, etc.) on metal substrate quickly, nondestructively and accurately. It is mainly used to measure the thickness of the vehicle's surface paint and other coating.

🚙HD Backlight Mode + 2 Units Conversion + Vertical 90° Test + Highly Sensitive Probe: ▶▶▶ With digital LCD backlight display, this car paint thickness meter can read data clearly in night or dark environment. ▶▶▶ The measurement unit can be switched between mm and mil to facilitate different measurement requirements. ▶▶▶ When measuring the thickness of the paint, the tester must be perpendicular to the test surface at 90°. ▶▶▶ High sensitivity probe makes measurement quickly and accurately.
🚙Portable and Easy to Use: Outline dimension is 1.5*3.43*0.87 inches, weight is 0.14 lb, mini size and lightweight make it easy to carry.

🚙Working Principle: This car paint thickness tester uses the Magnetic Induction Measurement Principle. The thickness of the coating is measured by the magnitude of the magnetic flux flowing, from the probe through the non-ferromagnetic coating into the ferromagnetic substrate.

🚙Please Kindly Note: This car paint depth gauge DOESN'T include the button batteries (CR2032*2). If you need it with battery, pls choose the “with battery” option for purchasing.

Car Paint Tester Operation Instructions：

👉 Measurement preparation
Open battery cover and load two CR2032 button batteries(Not Includes); Pay attention to positive and negative pole.

👉 Turn on/off
Leave the instrument hang in the air and press”CLR”button to turn it on,LCD full screen display,which means it enters the measurement state.Then long press”CLR”button to turn it off.

⚠️Note: Keep it away from the substrate when starting up.

👉 Measurement
Press the probe onto the coated metal substrate lightly,ensure that the instrument should be perpendicular to the surface of the object that being measured.

⚠️Note: When the probe was pressed on the substrate,the LCD will display”—“,then you must wait unit the measurement value displayed the LCD,then remove it from the substrate.If removing before a value is displayed,it will display the last measured value.

👉 Unit selection
After start-up,short press”UNIT”button to select measurement unit mm or mil.

👉 LCD backlight
After start-up,long press”UNIT”button to turn on/off the backlight.

👉 Clear screen data
After start-up,press”CLR”button to clear the data displayed on LCD screen.

👉 Power off automatically
The Car Paint Tester will power off automatically if two minutes no operation after start-up.And it will power off automatically as well after five minutes start-up,even when you are operating it.

Specification:

Measurement Range:0~1.80mm/0~71.0mil
Accuracy:±2%
Resolution:0.05mm/2mil
Measurement error:0.1mm
Units:um / mils
Screen:Digital LCD Backlight
Power:Two 3V CR2032 batteries
Size:38.0*87.0*22.0mm
Weight:63.98g(without batteries)

Packing List:

1* VC-100 thickness gauge
1* user manual
1* packing box

Q&A:

Q1: Is the galvanizing machine running?
A1: Yes, works.

Q2: How many batteries uses the device?
A2: 2PCS 3V CR2032 batteries.

Q3: The colors “metallic” work?
A3: Of Course work. Not only works when the paint is applied to the plastic. It Is Important that the paint metal. Even if it is plastic sheet, measure its thickness to metal. So the structure paint does not matter.

Q4: Aluminum Hood show?
A4: Of course.

Q5: How much time produced one measurement?
A5: Definitely not pinpointing but where it just 1s-2s.

Q6: Does it show in microns?
A6: Yes. It show in both microns and millimeters.

Q7: Can do paint thickness measurement on metal?
A7: Yes, perhaps for this it is intended!!!

Q8: Whether or not there film for sizing?
A8: Not need.

Q9: Are there calibration plates in the kit? Instruction in Russian is?
A9: No calibration plates in the kit. Instruction is in English.