Specifications:
Temperature range :-50-110 °
Dimensions: 48.5 * 40mm
Temperature control mode: ON / OFF
Resolution:When temperature is 0.1°, the resolution is -9.9~99.9, other temperature segment is 1°
Control accuracy: 0.1 °
Hysteresis accuracy: 0.1°
Refresh rate: 0.5S
High temperature protection: 0-110°
Supply voltage: DC 12V
Static current: ≤ 35MA, attract current ≤ 65MA
Output voltage: DC 12V
Output power: 20A relay
Measurement input: NTC (10K 0.5%) Waterproof Sensor
Environmental requirements: -10 ~ 60 ° ,Humidity 20% -85%
How to use:
Connect the power supply and the load, you can supply to the controller,
Is displayed as a measured temperature,
Press the SET button, the display flashes the temperature,
Press – to set the desired temperature,
After setting press SET to confirm return,
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:
Indicator: Off The relay is switched off, Always indicate the relay is closed.
LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display — as high temperature protection.
Package Included:
1pcs x -50-110°C Digital thermostat Temperature Control Switch 12V
1pcs x NTC probe cable
Specifications:
Temperature range :-30-110 °
Dimensions: 48.5 * 40mm
Temperature control mode: ON / OFF
Resolution:When temperature is 0.1°, the resolution is -9.9~99.9, other temperature segment is 1°
Control accuracy: 0.1 °
Hysteresis accuracy: 0.1°
Refresh rate: 0.5S
High temperature protection: 0-110°
Supply voltage: AC 110V-220V
Static current: ≤ 35MA, attract current ≤ 65MA
Output voltage: AC 110V-220V
Output power: 20A relay
Measurement input: NTC (10K 0.5%) Waterproof Sensor
Environmental requirements: -10 ~ 60 ° ,Humidity 20% -85%
Package Included:
1pcs * AC 110-220V W1209 Module
1pcs * transformer
1pcs * NTC probe cable
Product Features:
1, complete machine patch, wave soldering, stable performance, good consistency
2, with a shell, more beautiful and practical
3, embedded central processor chip (MCU), smarter, lower power consumption
4, power-off setting automatic memory (MCU built-in EEPROM storage unit)
5, control accuracy of 0.1 degrees Celsius
6, the setback of 0.1, can control the decimal (0.1-15.0)
Technical Parameters:
Temperature control range: -50~110°C
Resolution: -9.9~99.9 when 0.1 °C Other temperature range 1 °C
Temperature measurement accuracy: 0.1 °C
Control accuracy: 0.1 °C
Hysteresis accuracy: 0.1 °C
Refresh rate: 0.5 S
Display type: 0.28 inch three digital tube
Input power: DC 12V
Measurement input: NTC (10K 0.5%) Waterproof sensor Line length 300mm
Output: 1 relay output, 5A 250VAC, 20A 16VAC
Environmental requirements: -10~60°C Humidity 20%-85%
Size: 47.5*18.5*31.5mm
Power consumption of the whole machine: quiescent current: ≤10MA Pull-in current: ≤65MA
Method of use:
Connect the power supply and equipment to supply power to the thermostat. At this time, the temperature is displayed. Press the SET button, the display temperature will flash, press +- to set the desired temperature (press +- to quickly raise and lower) After finishing, press SET to confirm the return. At this time, the thermostat automatically performs relay on/off according to the setting!
Package included:
1pcs x W1209 Digital Thermostat
1pcs x NTC Sensor Probe
Specifications:
Temperature measurement range:-50Celsius-110Celsius
Temperature 0.1,other paragraph 1 Celsius
Accuracy:0.1Celsius
Return difference accuracy:0.1Celsius
Refresh rate:0.5s
High temperature protection:0-110Celsius
The input voltage:DC12V
Measurement input:NTC (10K 0.5%) waterproof type sensor
Output:10 a relay all the way
Environmental requirements:-10Celsius,-60Celsius humidity 20%-85%
Size:48mm(length) x 29mm(width) x 32mm
Hole size:46 x 26.5mm
Package includes:
1pcs x Temperature Controller
1pcs x Temperature Sensor
