W3001
Material: ABS
Size(Length x Width x Height): about 5.5 x 3.8 x 3.2cm (2.17 x 1.50 x 1.26'' )
Supply Voltage: DC 12V, DC 24V, AC 220V
Temperature Measurement range: -50-110 degree Celsius
Temperature Control Range: -50-110 degree Celsius
Control Accuracy: 0.1 degree
Display Accuracy: 0.1 degree
Measuring Input: NTC10K Waterproof Probe L=1 Meter
Output Type: Relay Output(Output Switch)
Output Capacity: 10A
Instructions:
1.Set the startup temperature:
Press ▲ key once to start the display temperature. Press and hold ▲ key for about 3 seconds to start the temperature digital flashing. Use ▲▼ key to set the desired temperature value.
2.Set the stop temperature:
Press the ▼ button to display the stop temperature. Press and hold the ▼ button for about 3 seconds to stop the temperature digital flashing. Use the ▲▼ keys to set the desired temperature value.
3.How to restore the factory settings:
When power is on, press and hold ▲▼ at the same time, the digital tube display 888 will then automatically jump to the detected temperature, that is, restore the factory settings.
Notice:
Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
Please allow 1-3CM differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
W3002
Temperature measurement range: – 50 ~ 110°C
Temperature control range: – 50 ~ 110°C
Temperature measuring accuracy: plus or minus 0.2 °C
Temperature control precision: plus or minus 0.1 °C
Measuring input: NTC10K L = 1 meters waterproof probe
Input power: according to the classification of choice
Output power: according to the classification of choice
Appearance size: 60 * 45 * 31 mm
This Temperature Controller come with 1meter waterproof sensor
This item sensor use 2P plug, very easy to change, you also can choose more long sensor
Feature:
Heating/refrigeration modes, users can set the start/stop temperature freely;With large and clear LED display for better readability
Easy to use:Three buttons for easy operation, to set start temperature, stop temperature, corrected temperature, delay start time.
Two Work Mode:Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature)
Applycation:Waterproof sensor, can be used to detect water or other liquid non-corrosive. objects temperature, for aquaculture,ornamental fish and other
Operation Instructions:
Set the start temperature; press the up button on one time to show the starting temperature, press the upper key for about 3 seconds, start temperature and digital flicker, and set the required temperature value through the upper and lower keys.
Set the stop temperature: press the next button to show the stop temperature, press the key for about 3 seconds, stop the temperature, and digitally flicker, and check the required temperature value through the upper and lower keys.
Restore factory setting: under the condition of electricity, at the same time hold down the upper and lower keys, the digital tube display 888 then automatically jump to the detection temperature, can restore the factory setting;
Start temperature < stop temperature = heating mode
Start temperature > stop temperature = refrigeration mode
Prompt:
When setting up the heating mode, if the temperature value is set upside down, the output indicator will not be lighted and the load will not work. If the above situation occurs after the completion of the setup, we can check whether the temperature value of the set is reversed.
Notes:
There are four models to choose from: the product is divided into isolation version and normal version.
The isolation version has one more transformer and the product performance is more stable. The transformer is an isolated power supply.
The normal version is a capacitive solution and the capacitive version is a non-isolated power supply.
W3005
Model: XH-W3005
Moisture range:00%~99%RH
Humidity control precision:0.1% RH
Measuring Accuracy: +/- 2%RH
Load Power: 12v 120w or 24v 240w or 220v 1500w ( depend on the one you choose )
MAX Output: 10A
output type:Direct output
Size:60*45*31mm
Instructions:
Connect to power supply , diplay Instructions humidity
Set start the humidity: Press the UP button display start the humidity , long press about 3s the start the humidity flashing , then press the UP or Down adjust the set
Set to stop the humidity: Press the Down button display Stop the humidity , long press about 3s the Stop the humidity flashing , then press the UP or Down adjust the set
Restore the factory Settings: press the UP and Down button at the same time , will display 888 then will Automatically detect the humidity
W3003
This product is a high-precision temperature controller with an accurate temperature control of 0.1°C and an ultra-wide temperature control range of -50°C-110°C. It uses a high-brightness LED display to clearly display readings during day or night. It can be used normally in all temperature control fields.
product information
Product Name: Digital Intelligent Temperature Controller W3003
Product model: D-W3003
Supply voltage: DC12V
Temperature probe: NTC (10K 0.5%) waterproof sensor, about 0.5 meters long
Control mode: heating / cooling
Temperature control accuracy: 0.1 ° C
Temperature range: -50 ° C -110 ° C
Temperature control range: -50 ° C -110 ° C
Load power: AC250V/5A
Output type: direct output
Sensor type: NTC
Appearance size: 60mm*45mm*31mm (length * width * height)
Mounting hole distance: 73mm
Mounting aperture: 4mm
Housing material: ABS material
