Door Window Magnetic Door Sensor 433mhz :
Door sensor is used for sensing the closing and opening state of the door, and is consisted of transmitter and magnet two parts. It can be installed on doors,windows or any object that can be closed and opened. When transmitter is separated from the magnet, door senser will send 433mhz alarm signal to alarm panel, which trigger an alarming.
Tip: Need pair with alarm hosts, can't work standalone.
It is compatible with all types of KONLEN alarm control panels, and some other alarm hosts in following picture.
Tips:
1. Mounted the door sensor on the doors or windows by the double-sides adhesive or small screws
2. There is a small Allow sign on the one side of transmitter and magnetic. Please make sure the two Arrows sign must be aligned together during installation.
3. The gap between transmitter and magnet should not more than 1cm (0.39inch).
4. The door sensor equipped with a button, can be set as SOS emergency alarm, doorbell etc.
Specification
Power Supply: DC 3V (CR2032 Lithium Battery x1)
Standby Current: <8uA
Alarm Current: <15mA
Transmission Distance: About 20 to 40M indoor;100m in open area(no obstacle)
Radio Frequency: 433Mhz
Chip code: EV1527
Note: Can not work alone!
Package :
set1: door sensor* 2 pcs
set2: door sensor*5 pcs
set4: door sensor*8 pcs
set5: door sensor*10 pcs
set6: door sensor*12 pcs
set7: door sensor*15 pcs
