X37 Professional Underground Detector Metal Detector Treasure Hunter Detector High Accuracy Metal Finder Detecting Newest
![]()
1. power supply:
4000mah lithium battery 3.7V output; continuous working time more than 12H.
2. Indicator:
2.1 Visual inspection: LCD display
2.2 Sound Speaker or Headphones
3. Display and function selection:
3.1 The startup display shows instrument-type segments and an ID digital display in the LCD center. When the machine is used to measure an object, the value of the measured object will be displayed.
3.2 If you need to select a function in standby mode, press and go back and forth to select the desired function. At the same time, you can adjust the selected functions through or.
3.3 When metal is detected, the value of the object will be displayed in the middle. The more precious the metal, the higher the value.
4. Menu: There are two detection modes:
AM: All metal detection mode;
DM: Identify detection mode;
In AM detection mode:
1. Dynamic detection mode and static detection mode. Select this icon and press or to switch between the two modes.
2. Threshold adjustment: This function can only be adjusted in dynamic detection mode. In dynamic detection mode, press the button to select this icon, and then press or to adjust the threshold. The threshold adjustment range is -9~+9.
3. Tone adjustment: After pressing the button to select this icon, press or to adjust the tone during detection. The higher the value, the higher the pitch, and vice versa. The pitch value range is -9~+9.
4. Sensitivity: Press to select the icon, and then press or to adjust the sensitivity, which is divided into 1~99.
5. Manual ground balance: Press to select the icon, and then press or to adjust the ground balance.
In DM mode:
1. Sensitivity adjustment: The adjustment method is the same as in AM mode.
2. Continuous shielding: Press the button to select the icon, and press or to adjust. The higher the value, the more curved bars on the screen. The smaller the value, the fewer the arc bars. Values within the value range of the arc bar will be masked.
3. Selective shielding: Press the button to select the icon, and press or to adjust the value. At this time, the arc bar corresponding to the value is lit. Press the button to confirm, and the signal under the arc bar will be shielded.
4. Tone: Choose the appropriate tone according to personal preference, there are 11 tone options in total. Press the select icon to pass or adjust. The default tone is 2F when powered on.
5. Recognition mode: There are 7 scene modes to adapt to various complex detection environments. After pressing the button to select the icon, use or to select the mode. The default mode is dE when booting.
5. Volume:
Press “””” to adjust the volume.
6. (Abbreviation: PP precise positioning mode)
PINPOINT is used when the user detects metal within the range during use, but cannot accurately confirm the location of the object. Press and hold the PP button of the machine, the LCD will display the value, then slowly put the machine down. Backtest up and down the range. The value will change if an object is detected. The smaller the value, the closer the object is. The sound will also change from small to loud. (This function can only locate the position and depth of the object, but cannot identify the type of metal.)
7. Automatically balance:
Press and hold the key and move up and down on the ground. When the value is fixed, the display indicates that the ground balance is completed. If there is metal in the ground and the ground balance cannot be completed, it will be displayed.
8. Frequency band adjustment: X37 has 7 sub-frequency F1 to F7. Hold down the key and press or at the same time to adjust the frequency band of the machine. The same machines in different frequency bands will not interfere with each other at close range.
9. System selection: X37 has DST technology 9.0 system and non-DST technology 9.1 system. In the power-off state, press and hold the column and, then press to power on. At this time, the screen will display the system number. Press or to switch systems as needed, then release and enter the detection state.
10. Restore factory settings function steps: In the power-off state, long press and hold, press to power on, the detector will start, release the button, and the factory settings restoration is completed.
9. Working frequency is about 13KHz±0.2KHz
10. Working current:
When not detecting metal, the operating current should be less than 118mA. When detecting metal and the horn sounds, the current should be less than 280mA.
11.Detection sensitivity:
After powering on, adjust the sensitivity () to 75~80, take a 25-cent coin, place it at a height of 35cm above the center of the probe coil, and move it back and forth at a constant speed. The LCD screen should have corresponding instructions, and the speaker will emit a high-pitched sound.
The working method is to place the PP, take a 25-cent coin, place it at a height of 35cm above the center of the probe coil, and slowly approach the probe coil downwards. The LCD screen should have corresponding instructions, and the sound from the horn will change significantly.
11.1 Temperature:
Working temperature range: 0℃ (4 hours) ~ +45℃ (4 hours)
Storage temperature range: -20℃ (8 hours) ~ +60℃ (8 hours)
4000mah lithium battery 3.7V output; continuous working time more than 12H.
2. Indicator:
2.1 Visual inspection: LCD display
2.2 Sound Speaker or Headphones
3. Display and function selection:
3.1 The startup display shows instrument-type segments and an ID digital display in the LCD center. When the machine is used to measure an object, the value of the measured object will be displayed.
3.2 If you need to select a function in standby mode, press and go back and forth to select the desired function. At the same time, you can adjust the selected functions through or.
3.3 When metal is detected, the value of the object will be displayed in the middle. The more precious the metal, the higher the value.
4. Menu: There are two detection modes:
AM: All metal detection mode;
DM: Identify detection mode;
In AM detection mode:
1. Dynamic detection mode and static detection mode. Select this icon and press or to switch between the two modes.
2. Threshold adjustment: This function can only be adjusted in dynamic detection mode. In dynamic detection mode, press the button to select this icon, and then press or to adjust the threshold. The threshold adjustment range is -9~+9.
3. Tone adjustment: After pressing the button to select this icon, press or to adjust the tone during detection. The higher the value, the higher the pitch, and vice versa. The pitch value range is -9~+9.
4. Sensitivity: Press to select the icon, and then press or to adjust the sensitivity, which is divided into 1~99.
5. Manual ground balance: Press to select the icon, and then press or to adjust the ground balance.
In DM mode:
1. Sensitivity adjustment: The adjustment method is the same as in AM mode.
2. Continuous shielding: Press the button to select the icon, and press or to adjust. The higher the value, the more curved bars on the screen. The smaller the value, the fewer the arc bars. Values within the value range of the arc bar will be masked.
3. Selective shielding: Press the button to select the icon, and press or to adjust the value. At this time, the arc bar corresponding to the value is lit. Press the button to confirm, and the signal under the arc bar will be shielded.
4. Tone: Choose the appropriate tone according to personal preference, there are 11 tone options in total. Press the select icon to pass or adjust. The default tone is 2F when powered on.
5. Recognition mode: There are 7 scene modes to adapt to various complex detection environments. After pressing the button to select the icon, use or to select the mode. The default mode is dE when booting.
5. Volume:
Press “””” to adjust the volume.
6. (Abbreviation: PP precise positioning mode)
PINPOINT is used when the user detects metal within the range during use, but cannot accurately confirm the location of the object. Press and hold the PP button of the machine, the LCD will display the value, then slowly put the machine down. Backtest up and down the range. The value will change if an object is detected. The smaller the value, the closer the object is. The sound will also change from small to loud. (This function can only locate the position and depth of the object, but cannot identify the type of metal.)
7. Automatically balance:
Press and hold the key and move up and down on the ground. When the value is fixed, the display indicates that the ground balance is completed. If there is metal in the ground and the ground balance cannot be completed, it will be displayed.
8. Frequency band adjustment: X37 has 7 sub-frequency F1 to F7. Hold down the key and press or at the same time to adjust the frequency band of the machine. The same machines in different frequency bands will not interfere with each other at close range.
9. System selection: X37 has DST technology 9.0 system and non-DST technology 9.1 system. In the power-off state, press and hold the column and, then press to power on. At this time, the screen will display the system number. Press or to switch systems as needed, then release and enter the detection state.
10. Restore factory settings function steps: In the power-off state, long press and hold, press to power on, the detector will start, release the button, and the factory settings restoration is completed.
9. Working frequency is about 13KHz±0.2KHz
10. Working current:
When not detecting metal, the operating current should be less than 118mA. When detecting metal and the horn sounds, the current should be less than 280mA.
11.Detection sensitivity:
After powering on, adjust the sensitivity () to 75~80, take a 25-cent coin, place it at a height of 35cm above the center of the probe coil, and move it back and forth at a constant speed. The LCD screen should have corresponding instructions, and the speaker will emit a high-pitched sound.
The working method is to place the PP, take a 25-cent coin, place it at a height of 35cm above the center of the probe coil, and slowly approach the probe coil downwards. The LCD screen should have corresponding instructions, and the sound from the horn will change significantly.
11.1 Temperature:
Working temperature range: 0℃ (4 hours) ~ +45℃ (4 hours)
Storage temperature range: -20℃ (8 hours) ~ +60℃ (8 hours)
Packing Lists:
1 x Detector
===== Other Notice ======
After-sales service:
After receiving the product, if you have any questions, please do not hesitate to get in touch with us and we will solve any of your problems.
Contact us:
Whether you have any questions, please contact us.
Delivery details:
If you don't receive your order, Don't worry, We will Refund or ReSend for you. If approaching the delivery date, But you don't received the parcel, please remind us to extend the delivery of protection.
4 GREAT REASONS TO BUY FROM US:
- Over 37,000 happy customers worldwide
- Real people on our support team ready to help
- The finest materials and stunning design — all our products are developed with an obsessive dedication to quality, durability, and functionality
- We use the most secure online ordering systems on the market, and are constantly improving our software to make sure we offer the highest possible security
BUY WITH CONFIDENCE
Our mission is to make your shopping experience as safe and enjoyable as possible. Have questions? Feel free to contact our award-winning customer care team for advice on everything from product specifications to order tracking.
- Money back guarantee: Something not quite right? If you’re not totally satisfied with your purchase, you can return it within 15 days for a full refund
- Risk-Free Purchase: We utilize industry-standard Secure Sockets Layer (SSL) technology to allow for the encryption of all the sensitive information, so you can be sure your details are completely safe with us
- Trustworthy payment method: We partner with the most popular online payment solutions that guarantee enhanced security and fast transaction processing
