XTOOL D8W Bluetooth Diagnostic Tool Automotive Scanner ECU Coding Key Programming Topology Map 38 Reset Service CANFD DOIP

TOP REASONS TO CHOOSE XTOOL D8W AUTOMOTIVE DIAGNOSTIC SCAN TOOL

WiFi Connection Diagnostics:Compared to Bluetooth and Cable connection diagnostics, WiFi connection diagnostics has a faster transmission speed and a longer communication distance, more free and not limited by the length of diagnostic cable, make work is more efficient, convenient and stable.

Full System Diagnostics: Full system diagnostics function enables a data link to the electronic control system of the vehicle with XTOOL D8W. The application performs functional tests, retrieves vehicle diagnostic information such as trouble and event codes and live data for various vehicle control systems,such as ABS,SRS,Engine,Transmission,Brake System,Emission System,Fuel system,Light system,Wiper System etc.

Advanced ECU Coding: OBD2 scanner XTOOL D8W Engine Control Unit Coding function is used to re-flash the vehicle control modules.It is used to reprogram adaptive data for vehicle control modules after repairs or replacements of vehicle parts;Make full use of the car hidden features,like change the chimes on car,set how many times the one-touch signal flickers for one touch,remember settings for Start/Stop systems,and more.

Programmable Module Installation (PMI):OBD2 scanner XTOOL D8W PMI function can copy the codes from old module to the new one when swapped the ECU or Module,reprogram the adaptive data for certain components after repairs or replacements.

VAG Guided Function(Help): XTOOL D8W auto diagnostic tool with Guided function, provides step-by-step instructions for various diagnostic and repair procedures, making it easier for you to perform complex tasks.This function main for Audi,for Skoda,for VW.

ADAS Calibration :Car Diagnostic Tool XTOOL D8W Advanced Driver Assistance System calibration function can calibrate the on-board ADAS systems,quickly detect and judge, and issue an alert to remind the driver. To avoid deviating from the lane or braking in a timely manner.

Bi-Directional Control:Bi-Directional Control capability is capable of performing Active Tests to access vehicle specific subsystems and component tests.XTOOL D8W out puts commands to the ECU to drive the actuators in order to determine the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators .

38+ Special Functions:Auto diagnostic scanner XTOOL D8W is equipped with 38+ special functions that extend its capabilities beyond “diagnosis” menu, including ABS Bleed, Injector Coding, Power Balance,Immobilizer, Fuel Trim Reset, Oil Reset, EPB, SAS, DPF, BMS, Throttle, Gearbox Match, Suspension, Start/Stop Reset, Coolant Bleeding
, and etc.These functions can make easy in vehicle maintenance and repair, providing more control and precision in various service tasks. The availability of these functions can vary based on the vehicle's make, model, and year.

Key Programming:Diagnostics tool XTOOL D8W IMMO service is applicable to both regular keys and smart keys.The key programming function mainly includes: programming a new keychain, reading PIN/PIN code calculation, checking the number of keys, generating keys, adding keys, and losing all keys.

CAN FD & DoIP Protocol:Built in CAN FD protocol,work on GM Vehicles after 2020.No need to buy separately CAN FD adapter.Diagnostics tool XTOOL enables much higher data rates than with CAN,saves both in terms of time and expenses in the case of complex diagnostic tasks and flash applications.Built in DoIP protocol,for BMW E/F/G Chassis, for Jaguar, for Land Rover newer vehicles,which runs faster than other products and reduces the risk of undetected errors to greatly enhance the user experience.

8 In 1 Live Data Display:8-in-1 live data can make the error code read by XTOOL D8W shown in graph ,to make the data in car system based on visualization,which helping you to analyze the abnormal parameter and help your problem more easy.

Pre & Post Scan:The Pre & Post scan can clearly recordingthe vehicle's diagnostic status before and after repairs,helps mechanics understand the issues and create suitable repair plans, while also keeping customers informed about theservices and costs.

15 Kinds of Language: English, Spanish, German, French, Italian, Finnish, Arabic, Japanese, Korean, Polish, Portuguese, Vietnamese, Russian, Simplified Chinese and traditional Chinese.Tell us the device serial number after you get the package, and we will arrange add the language within 24 hours on working days.

Hardware Configuration: OBD2 diagnostic tool XTOOL D8W possess with 8'' Touch Screen and Android 10 system, Quad-Core 1.5GHz CPU Processor,4GB RAM & 64GB ROM, which greatly increased the speed of running multiple task.With 5000mAh 7.3V stronger rechargeable battery, it increases storage power and reduces charging times.

3 Years Free Update: Make sure XTOOL D8W device is connected to a stable Wi-Fi network. Open the XTOOL D8W, click the “Update” option, and it will check whether there are available updates. If an update is available, select the software you want to download and install the update. You could use the functions normally without upgrade after 3 years.

 

Built-in WiFi module,WiFi connection requires simply insert the VCI box into the OBD interface for seamless data transmission.Compared with OBD2 Cable Connection, it reduces the complexity of cable connections and extended communication range up to 33-66 ft diagnosis distance.Compared with Bluetooth Connection, wireless WiFi connection diagnostics is more stable,it supports 64 Mbps(Max) transmission speed.

XTOOL D8W ONLY 4 STEPS To FINISH THE WIFI CONNECTION

 

Step 1:  Start with car or key turns to “ON” position

Step 2:  Plug the VCI to the OBD2 port

Step 3:  Wait for 5-10 seconds until the WiFi icon lights

Step 4:  Start Diagnosis

 

Note: WiFi is not required when using the device. WiFi connection means VCI is connected to the device through WiFi signal, not using WiFi network do diagnosis function.

 

XTOOL D8W ADVANCED ECU CODING

Automotive professional scanner XTOOL D8W Engine Control Unit coding function can allow users to program and configure the settings and parameters of various ECUs in a vehicle. Currently only available for VW, for Skoda, for Audi,for Benz,for Mistushi.

 

Recode Changed Modules:ECU Coding and Online Coding the changed modules to improve car performance and set up your vehicle according to your needs.

Renew ECU Coordination:Customization ECU configuration to make the car's ECU performance more suitable for the car.

Match/Learn/Code Components Module: Through matching, relearning, calibration,coding to make the component module more suitable for the operation of the car.

Make Full Use of Hidden Functions:Enable hidden functions and disable infrequently used functions, improve car performance or enable high-end functions.

Reinforce Performance:Customize OE-Settings through retrofitting or modification to optimize vehicle performance.

XTOOL D8W ADVANCED ECU CONFIGURATION

Flash Hidden Functions: OBD2 scanner XTOOL D8W helps refresh hidden functions to reprogram adaptive data for certain components after making repairs or replacements. You can activate higher-level car features and disable any annoying ones. Such as disabling the seat belt buzzer and rolling down the windows with the key fob.

 

Note: Coding functions vary by model. Check the compatibility by sending VIN to us

 

XTOOL D8W ADVCANCED FEATURES

Programmable Module Installation (PMI):Automatic diagnostic tool XTOOL D8W PMI function can for Ford,for Lincoln, and for Mazda copy the codes from old module to the new one when swapped the ECU or Module,reprogram the adaptive data for certain components after repairs or replacements.Clear any diagnostic trouble codes that may have been generated during module installation. This helps reset the system and ensure no errors remain. Ensure all relevant control modules are updated as needed to maintain compatibility and optimal performance.

VAG Guided Functions:For VAG vehicles,for Audi,for Skoda,for VW, XTOOL D8W ECU Coding tool provides OE level operation guidance for some complex special functions and repair procedures, to simplify the diagnosis process and shorten the diagnosis time.

ADAS Calibration Functions:XTOOL D8W is a diagnostic tool with Advanced Driver Assistance Systems calibration capabilities. ADAS calibration is crucial for ensuring that various driver assistance systems, like lane departure warnings and adaptive cruise control after maintenance or repairs.XTOOL D8W calibration function, calibrate the on-board ADAS systems,quickly detect and judge, and issue an alert to remind the driver. To avoid deviating from the lane or braking in a timely manner.

WARM TIPS: Functions are NOT universally compatible with all vehicles. Please check compatibility first.

Automotive mechanical tool XTOOL D8W can diagnose, analyze and maintain all car systems, including engine, AT, ABS, SRS, EPB, TPMS, door, gateway, air conditioning system, steering angle system, air suspension system and other systems in your vehicle; Through full system diagnosis,XTOOL D8W

performs functions such as reading and clearing fault codes,view live data, and freeze frame and so on for various systems.

Note: Functions vary by the car manufacturer, model and year. Please check the compatibility.

XTOOL D8W BI-DIRECTIONAL CONTROL

Automotive professional OBD2 scanner XTOOL D8W can use active tests to out put commands to the ECU, to turn on/off control modules or components without using the vehicle controls, thus saving diagnosis time. Such as:EVAP Tests,Compression Test,Turn On/ Off Radiator Fan,A/ C Clutch On/ Off,Fuel Pump,Window/ Mirror/Door Lock Test,Pump and Value Tests,Interior & Exterior Lights Test,Sound Horn Test

XTOOL D8W SUPPORT POWERFUL KEY PROGRAMMING

Note: Not all cars support key programming. Please send the specific car model to the seller to check the compatibility before purchasing.

38+ SPECIAL FUNCTIONS TO PERFORM COMPREHENSIVE VEHICLE SERVICE MAINTENANCE

1. Oil Reset: Perform reset for a new countdown of engine oil life system once changed the oil.

2. EPB Reset: Reset brake pads to maintain the electronic braking system safely and effectively.

3. SAS Calibration: Erase fault SAS memories and make calibration for Steering Angle Sensor

4. BMS Reset: Register the newly replaced car battery into the car computer.

5. Gearbox Match: Matching the gearbox/transmission after replacement.

6. ABS Bleed: Bleed the air out of the ABS system for firm brake pedals.

7. Immobilizer: Add new keys, disable lost keys, remote learning.

8. Injector Coding: Code the new injectors after replacement for accurate fuel injecting control and improve fuel efficiency.

Other Special Functions Includes: Throttle Relearn, Suspension Calibration, Trans Adaptation(Gearbox Match), TPMS Reset, ABS Initialization, Seat Calibrations, Zero Point Calibration(of yaw rate sensor/seat weight sensor, etc), Window/Door/Sunroof, Headlight Adjustment, Airbag Reset(airbag reset and clear airbag crash data), Idle Relearn, Power Balance, Transport Mode, Tire Size Reset
, Tooth Learning, VGT Learn(VGT Turbo Calibration), Fuel Trim Reset, Fuel Alcohol Composition Reset, Air/Fuel Reset, Start/Stop Reset, Language Change, and continuously growing.

Note: Special Functions vary across vehicle makes, models, year. Please come to us with VIN number to check compatibility before purchase.

PRE & POST SCAN

Pre-Scan: Perform an in-depth pre-scan to detect error DTCs, system faults, and potential performance issues. Gain full visibility before commencing repairs .

Post-Scan: Ensures that all fault DTCs are completely resolved, confirming successful repairs andoptimal vehicle performance by clearing issues and verifying system functionality.

New Diagnostic Report 2.0 Version :Allows you to add pictures and logos to the diagnostic report; You can merge and compare two diagnostic reports from pre- and post-scan, making analysis more convenient; You can select the information need to save in the diagnostic report.

WORK FOR 85+ CAR MAKER, 140+ BRANDS, COVERED 10,000+ CARS

Europe Cars:for DEMO, for VW, for MINI, for LANDROVER, for SEAT, for FERRARI, for FORD, for OPEL, for ALFA for ROMEO, for VOLVO and more

America Cars: for DEMO, for GM, for FORD, for CADILLAC, for CHEVROLET, for GMC, for HUMMER, for JEEP and more

Asia Cars: for Demo, for TOYOTA -LEXUS, for ISUZU, for MAZDA, for KIA, for INFINITI, for ACURA, for NISSAN and more

Australia Cars:for Demo, for Ford

XTOOL D8W SUPPORTS 15 KINDS OF LANGUAGE

English, Spanish, German, French, Italian, Finnish, Arabic, Japanese, Korean, Polish, Portuguese, Vietnamese, Russian, Simplified Chinese and traditional Chinese.

1. Activate the device with email address and serial number

2. Send the serial number to the seller to authorize the language

3. Switch language in settings

4. Click Update Device

Note: English is default language, if you need other language, please contact seller.