XTOOL InPlus IP919PRO WiFi Car Diagnostic Tool FCA CANFD DOIP Bi-directional ECU Coding Programming Topology Map Newer of D9SPRO

Latest Version of XTOOL IP919PRO Scanner

Level up from XTOOL InPlus IP919, D9SPRO, D9S, XTOOL InPlus IP919PRO Takes a big leap in Hardware & Software.Support Online ECU Coding & Programming, Newest Added FCA AutoAuth, For BMW For VAG Guided Functions & Module Topology Scan & PMI, Bi-directional Control and All Systems Diagnostics,42+ Service and extra IMMO Key Programming.(Works with KC100/KC501) ADAS Calibration & 8 in 1 Live Data Graphing, built-in CAN FD/DOIP Protocol, enjoy 3 Year Free Updates No IP restriction. Get the Extra Gifts: XTOOL XV200 endoscope,please reach us at aliexpress!

Why Do We Launch IP919Pro Based on IP919 & D9SPRO?

IP919PRO Hardware

Processor: 8 Core 4.0GHz💥
RAM: 8G💥
ROM: 128GB
Android Version: Android 10
AutoAuth for FCA: Support💥
Screen Size: 10.1 inch capacitive touch screen with 1920*1200 resolution💥
With Tablet charging Docking Station, Helping you during busy workshop hours and when charging equipment, you can release your hands and place them next to the base for charging without affecting usage

D9SPRO Hardware

Processor: 4 Core 1.50GHz
RAM: 4G
ROM: 128GB
Android Version: Android 10
AutoAuth for FCA: Not Support
Screen Size: 9.7 inch capacitive touch screen with 1024×768P resolution
Without Tablet charging Docking Station

Equipped with charger base

XTOOL InPlus IP919 Pro Automotivo Car Diagnostic Tool adopts new independent charging base design, which breathing display when charging.

Blue light means power connection

Red light means in charging

Green light means full charged

Pre & Post Scan Reporting At a glance

XTOOL InPlus IP919PRO WiFi car diagnostic scanner Supprot Print directly print detailed pre&post diagnostic report in seconds , Such as you can scan it when you take your car to be repaired, The report will show where the problem is. After repairing, you can scan again to check whether the problem has been solved. With this function help you prevent unnecessary repairs; reduce risk, Which also ensure and prove your car with complete & safe diagnosis. Pre/Post Scan helps mechanics, DIYers get clear comparisons of vehicle conditions before and after repairs. Of course, as a car owner, this will also greatly help you avoid being cheated by the mechanic for expenses, Which is goes a long way to justify the diagnostic charge.This feature will bring you more orders and save time and energy.

XTOOL Upgraded v2.0 Diagnostic Report

Select diagnostic report content

Revise diagnostic report name

Add logos/customer information/attachments

Save/share diagnostic report via emails

Highlighting critical systems with signage to enhance readability

One-Stop Complete Diagnostic Scanner

■ Wireless & intelligent Diagnosis & OE-level All Systems Diagnostics:

1.Built-in WiFi Connection of InPlus IP919PRO automotive diagnostic tool, Conducting diagnostics through WiFi VCI Box so as to set you from entangled wires. it can connect the scanner and the VCI and also the car automatically after you plug the VCI into vehicle's OBD2 port.

2.Supports 200000+ vehicles to do full systems diagnostic like Read/Clear Fault Codes, View Live Data Stream, Record & Playback Data, Retrieve Module Info,ect. Upgrade wirelessly via WiFi. The silky smooth operation will get you quickly move on to the next job, way better than clumsy scan tools. (Say goodbye to wired Diagnosis)

■ Advanced ECU Coding & Programming:

1.XTOOL InPlus IP919PRO Car Diagnostic Tool can do Online/Offline Coding, Like recode/ reprogram new ECU, Reset Adaptive Data, Match, Learn, Code ECU modules, Flash hidden functions to customize your vehicle, Helps you pass-thru the gateway to access the data for coding.

2.ECU Programming for facilitating ECU software/firmware replace and updates, new module programming, finally fix software-controlled driving performance and emission issues

NOTE: Please send VIN to check compatibility

■ XTOOL Newest Release FCA AutoAuth:

For 2018 and later FCA Vehicles with Secure Gateway Module Register with AutoAuth to enable your XTOOL InPlus IP919PRO car diagnostic scanner to communicate with the FCA Authentication System and bypass, so as to perform diagnostics and bi-directionals without using a bypass cable. For Dodge, For Jeep, For Chrysler,etc. ( No Account Provided)

■ More Than 42 Resets & Active Test (Bi-directional Control):

1.XTOOL IP919PRO automotive diagnostic tool Fix 99% car-related maintenance issue: ECU Configuration, Power Balance, Speed Limit, Electronic Pump Activation, Clutch Adaption, A-dBlue Reset, EGR Relearn, Write VIN, Instrument Cluster, etc (Keep Extension).

2.Auto diagnostic scanner XTOOL IP919PRO Actuate solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls.

■ Topology Mapping & For VAG/BMW Guided Functions:

1.XTOOL InPlus IP919PRO Car Diagnostic Tool gain Topology Mapping function! Powerful Intelligent Diagnose: Intutive Problem Presentation & improving repair efficiency by up to 99%

2.Upgrade of D9SPRO The IP919PRO Even a DIYer can perform some complicated functions according to prompt of the scanner step by step via this function For BMW For VAG

■ IMMO/Key Programming:

XTOOL IP919PRO WiFi Car Diagnostic Tool Added Delete & Reprogram Keys, Rewrite smart keys, All smart keys lost, Replace smart key ECU, Replace Key, Reset Key, Relearn a key.

●CAN FD/DOIP protocol

Experience the future of diagnostics with our latest innovation – the ability to seamlessly connect with CAN FD protocol cars, with DOIP for capabilities. These groundbreaking protocols revolutionize vehicle communication, achieving up to 5x faster communication between modules.

■ AUTO SCAN & AUTOVIN, 10X FASTER:

How much have you spent on car maintenance? Even a minor issue can take up a significant amount of time. The IP919PRO Car Diagnostic Scan Tool is designed to improve your work efficiency. With its AutoVIN technology, you can identify your vehicle's make, model, and year information with just one click. The convenient AutoScan feature automatically scans all of the vehicle's ECU and detects any fault codes.

■ 3 Years Free Updates & 20,000+ models Coverage & Enhanced Hardware

1.Keep this XTOOL IP919PRO automotive scanner diagnostic tool up-to-date with software subscriptions, free for 3 years, with much higher update frequency than similar scanners for cars on the market. The renewal of software will bring you new features, bug corrections, wider vehicle coverage and more. If there are any issues after purchase, feel at ease to send us messages.

2.It supports 99% of vehicle diagnosis in the world, 20,000+ models from the US, European, and Asian car markets; still expanding.

3.10.1 inch capacitive touch screen with 1920*1200 resolution better than 1920*1200 Resolution, Upgrade of D9SPRO, 8G+128G Bigger Storage + Android 10.0 OS + WiFi Connection Diagnosis + 6400mAh, 7.2V lithium-polymer battery and Support fast charger

■ Newest Function Release

💥Upgrade of D9SPRO added AutoAuth for FCA, New Added OE-LEVEL Supports 2018+ FCA , and XTOOL IP919PRO WiFi OBD2 Scanner is NO IP restriction (can be used worldwide).

Advanced Functions Use the latest software update function AutoAuth to provide OBDII diagnosis, active testing, calibration, etc. for modern FCA vehicles, making the diagnostics more secure.Applicable to FCA vehicles equipped with a security gateway module in 2017 and later

ECU Coding

2024 XTOOL new release IP919-PRO Diagnostic Tools Serving as an upper-level function that not only creates the vehicle’s potential but also increases your profits. These automatic functions save us work & time and allow us to concentrate on our driving experi-ence mostly.

1) Flash Hidden Functions: Activate advanced functions or Disable Vehicle Functions: like Deactivating the Start/Stop Function; Beeping When Unlocking and Locking; Seatbelt Warning Sounds; Mirrors Automatically Folding and Unfolding; and more.

2) Component Matching: Match the ECU modules after changing and replacement.

3) Online ECU Coding: Allow you to get more online ECU data from the OEM server, making coding easier and more accurate. Designed for VW, for Audi, for BMW, for Porsche, etc.

💥Please Note: ECU Coding changes preprogrammed options which depend on the type and number of electronic features already built in. Thus, ECU coding is not universally compatible and varies for different vehicles.

Online ECU Programming

The diagnostic tool comes with a free ECU programming functions that helps Special for BMW for Mercedes for VW/Audi for Skoda for Ford/Mazda users replace the existing software/firmware in the ECU, program new ECU and fix software-controlled driving performance and emission issues.
For repair shops that tend to expand your businesses to high-end vehicle models, this XTOOL scanner IP919PRO will make your plans come true.

What can this Programming Function do for you?

1) Replace ECU: program blank ECU

2) Write-in Data: refresh used ECU

3) Repair missing ECU information

Bi-Directional/ Active Test:

As the 2024 upgraded version of XTOOL IP919PRO, our Newest IP919PRO auto diagnostic scanner for all cars inherits the powerful Bi-directional Control which makes it the most cost-effective XTOOL scanner. Active test is widely used on car subsystems to help you check if the car actuators are all in good condition. Such as windows, rear mirrors, sunroof, wipers…

And also can perform other actuation test functions including Modulate the throttle,Turn Off ACC Lane Keeping Assist System (LKAS) ; Turn ON/OFF Front and Rear side ACM Solenoid, Acceleration Device Test,Brake Vacuum Pump, Open Brakes tests, Parking Brake Motors, Wheel Speed Sensor Supply, etc. Wide Vehicle Voverage With NO IP Limited

– EVAP Vent / Purge Solenoid;
– Cycling ABS Motor Pump;
– Fuel Injector Test;
– Cooling Fan Test;
– Cycling A/C Clutch Relay;

42+ Special Service Functions:

Doing regular and routine maintenance on a modern car is impossible without a diagnostic system. Even the simplest procedures require the participation of an auto scanner. That's why XTOOL engineers have been working on them and making them as user-friendly as possible in the new XTOOL IP919PRO Diagnostic Scanner. Now you can easily do functions like:

●Oil Reset: Reset new calculation of Engine Oil Life System for an accurate reading of next oil change.

●EPB: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.

●ECU Configuration: Re-flash the hidden function of the car and customize the vehicle as need.

●Fuel Trim Reset: Reset the fuel trims provides for a chance that your adaptive fuel map could become stable.

●DPF Regeneration: Clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.

●Throttle Relearn: Initialize the throttle actuators to the default state;

●TPMS (Tire Pressure Monitor System) Reset: When the tire pressure is insufficient, it is necessary to reset the tire pressure after replacing the tire or sensor, make your car recognize the new TPMS sensor.

●ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal

●Injector Coding: Code a new injector to better identify injectors to accurately control fuel injection.

●IMMO /Key Programming: Remote Key/Key Fob add and programming+ Read Pin Code+ IMMO Reset, etc.

●Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality

●Suspension: Adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.

●SAS: Adaptation of the sensor to the angular position of the steering wheel

●Airbag Repair: After replacing the Airbag, reset the Airbag data and clear the collision data.

●Headlight Matching: initialize the adaptive headlamp system.

●BMS (Battery Management System) Reset: Re-match the control module and motoring sensor for battery detecting more accurately, clear original low battery information, and prevent the related control module from detecting false information.

A/C Relearn, Write VIN, HV Battery, Window Initialization, Seat Configurations, Power Balance, Electronic Pump Activation, Disable Transportation, Tire Refit, A/F Reset, Start/Stop Reset, Rain/Light Sensor, Brake Reset, instrument cluster, transporte Mode, Gear Learning, EEPROM, ADAS Calibration, speed limit, clutch adaption, Adblue Reset, EGR Relearn, FRM Reset, Nox Reset, VGT Relearn, Control unit Reset, Language Change.

And many more. The new service functions keep rolling out from XTOOL, including expanded coverage for the latest vehicle makes and models.

💥Note: 1) Timely updating will develop more functions; 2) Functions vary by the model.
You can message the VIN code to us to check the compatibility.

Revolutionary Topology Module Mapping

XTOOL InPlus IP919PRO automotive diagnostic tablet is able to support Module Topology Mapping that enable users to know all module status at a glance and root out the problems easily. As the most powerful XTOOL scanner, XTOOL InPlus IP919PRO scanner features the riches fault code analysis function with which you can access the most comprehensive and the latest code-specific data, TSB, DTC analysis, repair assist, repair tips, and relevant repair cases. It has been drawn from real-world shop repair orders and record data that has been thoroughly verified by automotive maintenance professionals.provides a comprehensive view of a vehicle's data bus configurations,

💥Please be noted that Topology is not universal to all the above vehicle brand models, please send your VIN to us before you place order.

All-system Diagnostic

The XTOOL IP919PRO automotive diagnostic tools Full Systems Diagnoses In All Vehicle Systems on the ECU : Read/erase codes, view live data, retrieve ECU version information. It performs active testing and service functions on all systems including E~CM, TCM, ABS, SRS, BCM, IMMO, BMS, TPMS, SAS, f uel system, lighting system and A/C system. The functions cover up to 200,000 models worldwide.

8 IN 1 Live Data Graphing:

XTOOL Newest IP919PRO automotive scanner Export Live Data as CSV: Exporting live data as CSV file to track vehicle performance over time.Up to 8 PIDS Graphing in One: Allow you to customize specific PID, and merge graphs for up to 8 data PIDs combined at one time in one view. Graph up to 8 sensors individually on the same screen.A line graph will allows you to see what happened at what time and in relation to what else you're interested in,

Key Fob Coding & Programming

IMMO KEYS & MORE FUNCTIONS
The IP919PRO wireless car diagnostic tool is cost-effective to offer IMMO feature, allowing key reprogramming and remote disabling of lost keys. Note: Only available for some vehicles

Auto VIN/SCAN

OBD2 professional scanner XTOOL IP919 Pro supports Auto VIN Scan, Manual VIN Input, Scan VIN, Manual Vehicle Selection, etc. for vehicle identification:
Auto VIN Scan: fast identify vehicles by auto-detect and scan all available systems for fault codes;

15+ Languages

XTOOL IP919PRO Automotive Scanner supports multiple languages for global technicians, eliminating language barriers. Effortless switch, no translation needed.

XTOOL INPLUS IP919PRO Automotive diagnostic tool covers 15+ languages for better term understanding: English, German, Spanish, French, Traditional Chinese, Japanese, Polish, Portuguese, Russian, Italian, Korean, Dutch, and etc.

💥If you want to change the language, please reach to us with SN, All device default in English before send

200+ Brands, NO IP Restrictions

XTOOL Automotive Scanner IP919PRO Unlike factory and dealer tools that can work only for certain vehicles with limited functionalities, XTOOL scanner IP919PRO for all cars has complete database covering 99% of vehicles from 200+ diverse brands / 20,000 models

Supports 2018+ FCA, and “NO IP restriction” (can be used worldwide w/o losing any features).

IP919PRO ranks top in professional automotive tablets and keeps updating to support more newer modes from 2023 to 2024.

IP919PRO Specification

● Operating System: Android 10.0
● Processor:8 GHz, octa-core Processor
● Memory: 8GB RAM & 128GB On-board Memory
● Display: 10.1 inch TFT-LCD with 1920 x 1200 resolution & capacitive touch screen
● Battery：6400mAh, 7.2V lithium-polymer battery, fast charging
● Working Voltage：9V-32V
● Power Voltage：DC 12V
● Humidity：<90%
● Dimension (L×W×H)：313X218X30 mm
● Protocol compatibility：CANFD, DoIP
● Storage Temperature：-40 to 60℃
● Operating Temperature：-10 to 40℃
● Auto Input/Output：Microphone/ Speaker
● Sensors：Gravity Accelerometer, Ambient Light Sensor
● Camera：Rear camera, 8.0 Megapixel, AF with Flashlight.
● Connectivity：WIFI 2.4/5 GHZ, Type-C

IP919PRO Package Includes

1 * IP919PRO Android Tablet
1 * VCI WiFi connector
­1 * For KIA-20
1 * For Mazda-17R
1 * For Nissan-14
1 * For GM/Daewoo-12
1 * For Suzuki-3
1 * For Fiat-3
1 * OBD II-16
1 * DB15 Main Cable
1 * For Toyota-17
1 * For Audi-4
1 * For Mitsubishi-12+16
1 * Universal-3
1 * Citroen-2
1 * For BENZ-38
1 * For BENZ–14
1 * For HONDA-3
1 * For BMW-20
1 * For HYUNDAI/Kia-10
1 * Quick Start Guide & Packing List
1 * Type C to A
1 * Type C to B
1 * Type C to C
1 * Charge Adapter US
1 * Charge Adapter UK
1 * Charge Adapter EU