WELCOME TO XTOOL OFFICIAL DIRECT STORE

1. All of Products are 100% Original and the Best Price. We Support Wholesale Price and Drop Shipping.

2. Fast Shipping from Overseas Warehouses (US/UK/RU/PL/FR/ES/MX/BR/CA/AU) within 2 Days, No Shipping Fees.

3. 365 DAYS Free Replacement, All Products Have Been Passed Strict Quality Test before Shipment.

4. Provides 2 Years Warranty, Lifetime Technical Support.

5. Provides 24-hour Online Service and Professional Technical Support! Wish you have a quality shopping experience, please contact us before placing an order!

XTOOL XTS500 All-in-One J2534 Pass-Thru Device with Multi-Protocol & OEM Support

XTOOL XTS500 is a high-performance J2534 VCI device powered by an NXP Processor, designed for compatibility with both 12V ga**line and 24V diesel systems. It supports wired and wireless connections, including stable 2.4G WiFi with a range of over 10 meters, and works with all mainstream vehicle communication protocols from 1996 onward. Capable of handling Dual-CAN for front-wheel drive systems, DoIP for BMW/Mercedes, and CAN-FD for GM models, it seamlessly supports OEM software from more than 10 major vehicle manufacturers. Driver installation is simple, making the XTS500 an all-in-one J2534 tool ideal for a wide range of professional diagnostics.

⚠️Warm Tips: The All Functions as Follows Need OEM Software Support, and We Do Not Provides OEM Software.

1. J2534 Pass-Thru Programmer XTOOL XTS100 Performs OE-level vehicle diagnostics and programming via J2534 pass-thru protocol.

XTOOL XTS500 J2534 tool provides direct access to OEM programming and diagnostic functions, supporting firmware flashing, ECU programming, and module configuration.

2. XTOOL XTS500 Diagnostic Tool with OEM-Level Full System Diagnostics

XTOOL XTS500 diagnostic tool performs comprehensive scans across all available systems in supported vehicels, reads and clears trouble codes, view live data, check freeze frame, view ecu information, perform active tests and special function, etc..

3. OE-standard reprogramming and calibration updates.

XTOOL XTS500 programming tool allows writing of OEM software, ECU resetting, and performance calibration for various electronic control units.

4. Dual-CAN, CAN-FD/DoIP Support

Dual-CAN protocol for front-wheel drive systems, DoIP for BMW/Mercedes, CAN FD protocol for GM models 2020+.

5. OE-Level Diagnostics & Programming for 18+ Brands, Supports 12V Ga**line & 24V Diesel

XTOOL XTS500 J2534 diagnostic tool can support for Toyota/Lexus/Scion 1996+, for Honda/Acura 1996+, for GM 1991+, for Nissan/Infiniti 2000+, for Audi 2005+, etc. Please note: vehicle/model compatibility depends on OEM software support.

6. XTOOL XTS500 J2534 Programmer with Advanced ECU Coding

XTOOL XTS500 J2534 Device enables advanced ECU coding capabilities, allowing you to flash hidden features, personalize vehicle settings, and disable unwanted functions for a fully customized driving experience.

7. Dual Connectivity – Cable & Wi-Fi J2534 Pass-Thru Programming Tool

XTOOL XTS500 J2534 Pass-Thru Protocol Tool offers flexible connectivity options, supporting both cabled and Wi-Fi connections for user convenience.

➤ XTOOL XTS500 OE-Level All System Diagnostic Tool With J2534 Pass-Thru Protocol

XTOOL XTS500 diagnostic tool can perform OEM-Level Full System Diagnostic, allowing to access all available system of supported vehicles to read and erase fault codes, view live data and freeze frame, check ECU information, perform active test, special function, ECU coding, etc.

Note: OEM software required for all functions.

➤ XTOOL XTS500 J2534 Pass-Thru Protocol OEM Programming Tool

XTOOL XTS500 J2534 Programming Tool enables dealer-level ECU programming, including software updates, module replacements, and version upgrades. With this tool, you can reprogram ECUs after replacement and update modules to the latest software version.

1. Flash ECU firmware via OEM server
2. Update and reprogram ECU modules
3. Upgrade to the latest software versions
4. Reinitialize system with factory data
and more.

➤ XTOOL XTS500 OEM Diagnostic Tool With Advanced ECU Coding Function

XTOOL XTS500 J2534 VCI Tool delivers professional dealer-grade ECU Coding, enabling hidden function activation and component matching. Through ECU coding, you can personalize your vehicle by adjusting chime sounds, enabling automatic mirror folding, deactivating the Start/Stop function, disabling seat belt reminders, and more.

1. Personalize vehicle settings
2. Match/code newly replaced ECUs 3.Component/module synchronization
4. Enable/disable comfort functions
and more.

➤ XTOOL XTS500 J2534 Diagnostic Tool — OEM Full Bidirectional Control & Active Tests

XTOOL XTS500 J2534 tool delivers professional OEM-level bi-directional controls, enabling precise validation of vehicle system performance through direct bidirectional communication. This tool allows technicians to interactively command and evaluate electronic components and subsystems, ensuring accurate fault isolation and operational verification. Supported active tests include:

1. Test Door Lock
2. Activate/Deactivate Sound Horn
3. Turn On/Off Lights
4. Operate Mirrors
5. Open/Close Windows
6. Modulate Throttle
7. Turn On Radiator Fan
and more.

➤ XTOOL XTS500 J2534 Diagnostic Scanner — All Available Reset Services Supported by OEM

XTS500 J2534 tool serves as a bridge to OEM software, enabling the execution of all special functions supported by the original manufacturer's software, such as Oil Reset, ABS Bleeding, BMS Reset, Injector Coding, EPB Reset, A/C Relearn, Throttle Adaptation, EPS Adaptation, Water Pump Actuation, DPF Regen, Power Balance, CPS Reset, Gearbox Adaptation, Write VIN, Tire Size Reset, Suspension Adaptation, ABS/ESP Adaptation, Clutch Adaptation, Control Unit Reset, ADAS, Speed Limit, HV Battery, Rain/Light Sensor, Seat Calibration, Transport Mode, Stop/Start Reset, NOx Reset, RGR Relearn, Turbo Relearn, FRM Reset, Headlight, and many more specialized functions.

➤ XTOOL XTS500 J2534 Tool Suppport J2534 Protocol with Newly CAN FD & DoIP Protocol

XTOOL XTS500 J2534 VCI Tool supports J2534 Pass-Thru protocols, Dual-CAN, CAN-FD, and DoIP, along with a wide range of additional industry-standard protocols including: ISO 14229, ISO 14230, ISO 15031, ISO 27145, ISO 9141, ISO 15765, ISO 11898, ISO 13400, SAE J1708, SAE J1939, SAE J1587, SAE J1850 and more.

XTOOL XTS500 J2534 Tool provides OEM software support for 18 major automotive brands, with coverage as follows:
For Toyota 1996 to current
For Lexus 1996 to current
For Scion 1996 to current
For Acura 1996 to current
For Honda 1996 to current
For GM 1991 to current
For Ford 1996 to current
For Nissan 2000 to current
For Infiniti 2000 to current
For Audi 2005 to current
For Skoda 2005 to current
For VW 2005 to current
For Subaru 2000 to current
For Land Rover 2005-2020
For Jaguar 2005-2020
For Mercedes 2000 to current
For Porsche 2005 to current
For BMW 2000 to current

➤ General J2534 diagnostic functions are typically performed using WiFi communication

1. Download J2534 Driver: Go to XTOOL Official Website to download “J2534 ToolBox” in your PC(Support for Windows 7 & Later Version Only, Not for IOS System) to suit J2534 for XPortal

2. Connect the VCI Box: Plug the OBDII-16 connector from the VCI box into the vehicle's DLC port.

3. Insert the Wireless Receiver: Connect the USB wireless receiver to an available USB port on your computer.

4. Establish Wi-Fi Connection: Go to your computer's Wi-Fi settings. Select the network named “WLAN 2”, then locate and connect to the Wi-Fi hotspot matching your device's serial number.

5. Begin Diagnostics: Once successfully connected to the hotspot, your computer is linked to the device and ready for operation.

NOTE:

1. Download and Installation Instructions:
To download and install the software, please visit the official XTool website, navigate to Support → Download Center, and locate “J2534 Toolbox“.

2. 🔗Direct Download Link: //www.xtooltech.com/english/DownloadCenter.html

➤ A Type-C to Type-C cable is strongly recommended in these critical scenarios:

1. ECU Programming
Ensures stable and uninterrupted data transfer during firmware flashing or module programming, preventing potential ECU damage.

2. ECU Coding
Provides a reliable connection for writing configuration data, performing adaptations, or customizing vehicle settings.

3. Diagnostics via DoIP (Diagnostics over Internet Protocol)
DoIP diagnostic involves high-volume data transmission over Ethernet. A wired connection ensures consistent communication without interference or dropouts.

💡 Why Type-C to Type-C?

1. Prevents data transmission failures
2. Reduces risk of vehicle module damage
3. Essential for time-sensitive and data-intensive operations

➤ XTOOL Multi-Protocol Diagnostic Tool: Compact Design, Wide Compatibility & Dual Connectivity

Supported PC Operating Systems: Windows 7 or higher

Processor: NXP Processor

Screen: 0.97-inch Monochrome Display

Operating Temperature: 0 to 40°C

Dimensions (L×W×H): 21.25cm × 17cm × 5cm (outer packaging)

Connection Methods: Supports both Wired and Wi-Fi Connection

Connector Type: Type-C

Operating Voltage Range: 9-36V

Storage Temperature: -40 to 60°C

Supported Protocols: Common Diagnostic Protocols + Dual CAN, CAN FD, DoIP

➤ XTOOL J2534 VCI Package Includes:

1. XTOOL J2534 VCI Device
2. USB Wireless Receiver
3. User Manual
4. USB-C to USB-C Cable
5. USB-C to USB-A Adapter
6. OBD2 Extension Cable